Teledyne Test Tools T3PS16081P 16V/8A 128W Programmable Linear DC Power Supply

Key Features At A Glance

• Single-output range spans 0–16 V / 8 A (128 W) and 0–30 V / 5 A (150 W) across the two-model series
• Low-noise linear design: ripple and noise ≤ 350 µVrms / 3 mVpp (20 Hz to 20 MHz)
• 1 mV / 1 mA setting resolution with 5-digit voltage and 4-digit current display
• 2.8 inch true-color TFT-LCD (240 × 320 pixels) with real-time waveform display
• Two output modes: standard 2-wire and 4-wire remote sense (max 1 V compensation)
• USB Device and LAN interfaces standard for remote control; SCPI commands and LabVIEW driver supported
• Fast transient recovery < 50 µs, 0.01% load regulation, 0.2% line regulation
• 5-group internal save/recall and 100/120/220/230 V universal AC input design

The Teledyne Test Tools T3PS16081P and T3PS30051P are programmable linear DC power supplies offering a single high-performance, high-precision programmable output. Both models pair a compact, modern, low-noise linear design with a 2.8 inch TFT-LCD display, remote computer control capability, and a real-time waveform display to combine high performance with ease of use.

These supplies are positioned for a wide range of bench power applications. Their low-noise linear output (≤ 350 µVrms) makes them suited to electronic components and systems, battery, IoT, digital, analog, and audio applications. Additional output short-circuit and overload protection functions further support production and development use.

Brand Heritage

Teledyne Test Tools (the "T3" prefix) is a brand and trademark of Teledyne LeCroy Inc., which has been building test and measurement instruments since its founding in 1964. The Teledyne Test Tools line extends the broader Teledyne LeCroy product portfolio.

Compare Other Models in This Series

This series comprises two programmable linear DC power supplies that share a common platform — a 2.8 inch true-color TFT-LCD display, 1 mV / 1 mA resolution, low-noise linear regulation, real-time waveform display, and rear-panel USB Device and LAN interfaces — while differing in their output voltage, current, and power ratings.

Both models provide a single high-precision programmable output with output short-circuit and overload protection, two-wire and 4-wire remote-sense output modes, five-group parameter save/recall, and a 100/120/220/230 V compatible input design intended to suit different power grids.

Each model below links to its own dedicated product page with condition-matched pricing. Select the new listing that matches the output voltage, current, and power rating your application requires.

The two models differ primarily in their output envelope: the T3PS16081P delivers 0–16 V at 0–8 A for up to 128 W, while the T3PS30051P delivers 0–30 V at 0–5 A for up to 150 W. Both support 4-wire SENSE compensation output mode with a maximum compensation voltage of 1 V for accurate sourcing over long leads or high-resistance connections.

Shared specifications — including 1 mV / 1 mA resolution, ripple and noise ≤ 350 µVrms / 3 mVpp, transient recovery under 50 µs, and program/readback accuracy of ±(0.03% of reading + 10 mV / 10 mA) — apply across the series. Refer to the comparison table for the per-model voltage, current, and power ratings.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• USB Cable – 1
• Quick Start – 1
• Power cord – 1
• Output Test Cord – 2 Sets

Product Core & Specifications

Important: All specifications are guaranteed after the instrument has been operating for more than 30 minutes at the specified operating temperature.

About this New unit

This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.