Teledyne Test Tools T3PS16006 60V/6A 360W Single Output Switching DC Power Supply

Key Features At A Glance

• Constant Voltage and Constant Current operation for wider application coverage
• Output ranges of 0–12 V/30 A, 0–24 V/15 A, and 0–60 V/6 A across the series, all rated 360 W
• Dual measurement display shows voltage and current settings simultaneously
• High regulation maintained at 0.01%
• Over Voltage Protection (OVP) for the supply and connected load
• Rear-mounted remote sense terminals compensate for cable losses to the load
• Remote Output ON/OFF control from an external device (not programmable)
• Switched-mode high-efficiency design in a compact 128 x 151 x 295 mm, ~3.2 kg chassis

The Teledyne Test Tools T3PS1000 Series is a single-output, 360 W switching DC power supply line. Over Voltage Protection guards both the supply and the connected load against unexpected conditions, while high regulation is held at 0.01%. Remote sensing adds an extra level of precision by compensating for cable losses between the power supply and the load, and the output can be turned on or off from an external device through remote-control terminals.

A DC power supply delivers controlled, adjustable voltage and current to a device under test, providing the stable power rail that bench and production testing depends on. The T3PS1000 Series is positioned as a solution for power-efficient bench-top or portable applications that require high regulation.

ValueTronics stocks and holds its own inventory in a 20,000 sq ft secure warehouse at 1675 Cambridge Drive in Elgin, Illinois. Holding inventory on hand means the instrument you order is the instrument we already have in stock.

Brand Heritage

LeCroy Corporation, founded in 1964, became Teledyne LeCroy following its acquisition by Teledyne Technologies in 2012. Teledyne Test Tools — branded "T3" — is a product brand and trademark of Teledyne LeCroy Inc.

Compare Other Models in This Series

The T3PS1000 Series is a family of single-output switching DC power supplies that share a common 360 W output rating and a compact switched-mode chassis. The three models differ in how that 360 W is delivered, trading maximum voltage against maximum current to suit different load profiles.

Every model in the series carries the same core capabilities — dual measurement display, Constant Voltage and Constant Current operation, 0.01% regulation, Over Voltage Protection, rear-panel remote sense, and remote output on/off control — so the choice between them comes down to the voltage and current envelope the application needs.

Each model in the series is sold on its own dedicated product page, and the listing you are viewing reflects new pricing matched to its condition. Choose the model whose voltage and current range fits your application; the comparison table below shows how the three models differ.

The three models map one output envelope each onto the shared 360 W ceiling: the T3PS11230 supplies 0–12 V at up to 30 A, the T3PS12415 supplies 0–24 V at up to 15 A, and the T3PS16006 supplies 0–60 V at up to 6 A. Higher-voltage models therefore deliver proportionally less current, and lower-voltage models deliver more.

Constant-current ripple also tracks the current rating across the family, specified at ≤ 3 mArms on the T3PS16006, ≤ 10 mArms on the T3PS12415, and ≤ 30 mArms on the T3PS11230. The comparison table that follows lists the per-model voltage, current, and ripple figures side by side.

Additional differences in specifications beyond the few shown above are not listed here — see each model's full specifications below.

Accessories Supplied

• Quick Start Guide x 1
• Power cord x 3
• Test lead GTL-203 A x 1

Product Core & Specifications

Important: Remote Output ON/OFF control is not programmable.

About this New unit

This is a brand-new, factory-sealed unit, supplied exactly as it arrives from the manufacturer and backed by the full manufacturer warranty. For the exact configuration, available options, included accessories, or current lead time for your application, our Test Architects can confirm the details before you order.

ValueTronics supplies both new and used test and measurement equipment. New units ship factory-sealed, exactly as received from the manufacturer; every used unit is inspected and functionally verified in-house at our 20,000 sq ft secure facility in Elgin, Illinois before it ships. Our Test Architects can help you select the condition, calibration, and configuration that fit your application.

Please review the Manufacturer's Data Sheet to verify published specifications. Feedback on this webpage is always welcome — please reach out to your Test Architect at any time for questions or concerns. Thank you, we truly appreciate you being our customer.