Parameters:
Support battery type: Li Po/Li Fe 2 ～ 6 cells
(The nominal voltage is 7.4V~22.2V, and the tap is used)
Receiver battery: 1.2V ～ 8.5V DC
(Not limited to battery type, but it needs to be externally connected with 7.4V~11.1V, and use JST connector)
Setting range of balance voltage (lower limit): 2.0V~3.9V (default 3.3V)
Discharge voltage setting range (lower limit): 3.0V~4.2V (default 3.9V)
Discharge current (4.0V/Cell): about 450mA
Support battery port: conventional battery linear port Jst plug port Rx port
Strongly prompt: 2 batteries cannot be inserted at the same time! Only one port can be used at a time. Otherwise, the arrester may be overloaded and burnt

How to use the balance function??
Insert the balancing head of the lithium battery pack into the corresponding socket, press the Balance key, and the bulb pattern will be displayed behind the battery. A small balance will appear on the screen, corresponding to the text Balance mode, that is, after balancing, the bulb pattern will disappear, and the balancing will end. Press Cancel to exit balance mode.

How to use the discharge function??
Insert the balance head of the lithium battery pack into the corresponding jack, press the Discharge key, the bulb pattern will be displayed behind the battery, and a battery cluster will appear in the screen, corresponding to the word Discharge mode, that is, discharging. When the battery voltage is lower than the set battery value, the bulb pattern will disappear, and the discharge is completed. Press Cancel to exit balance mode.

How to set the voltage??
Insert the balancing head of the lithium battery pack into the corresponding socket, click Cancel, and the screen will display Balance Voltage limit, and then press Discharge or Limit to adjust the value. After adjustment, click Cancel to exit.

Package included:
1 x 3in1 Battery Balancer LiPo/LiFe 2-6S Cell Balancing Discharger Voltage Meter Tester LCD Screen JST Connector for RC Model