Pilot-RC already surprised everyone with a new level of precision and agility with our extremely popular Laser. We have now taken all these great features and grown them into our new Slick.

The Pilot-RC Slick, as well as looking great and offering color schemes designed by legendary Italian designer Mirco Pecorari at Aircraft Studio Design, it once again flies as good as it looks, and that is really saying something!

All the crazy agility and maneuverability of the Laser, while keeping the friendly flying characteristics of Pilot-RC planes, the new Slick offers an even further improvement in precision and aero musical performance, feeling like a larger plane, a larger plane that can go nuts!

• Wingspan: 74" (1,880mm)
• Length: 70.6" (1.792mm)
• Wing area: 1.081"² (6.978 cm²)
• Weight: 11.4 lbs (5.2 kg)
• Engine: 30-40cc or equivalent electric
• Servos: 4 high torque plus throttle; (2) per aileron, (1) for elevator and (1) on rudder
• Center of Gravity: 136mm, Measured back from leading edge of the wing at the fuselage

Note: Due to constant design improvements Pilot RC reserves the right to change and modify design specifications without notice. Pilot's goal is to provide you with the highest performing airframes in the world using the latest technology, building techniques and materials.
 

FEATURES:

• NEW! Hybrid construction from wood and composite materials for specially reinforced fuselage and wings.
• NEW! Patented quick assembly system for wings and SFG.
• NEW! Patented quick assembly system for canopy. Especially useful for electric version, fast battery change!
• Film covering applied over a Genuine German Oracover (Ultracote) base
• Highly prefabricated, experienced builders can have air ready in under a day
• Pre-installed aileron and elevator hinges (glued and pinned)
• Easy canister installation due to open construction
• Removable wings
• One piece stabilizer
• Laser engraved motor mounting position
• Pull-Pull system for Rudder servo
• Cowl fits both gasoline and electric motors

INCLUDED HARDWARE:

• Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fiberglass control horns and wheel pants)
• Pre-installed hinges and pre-mounted canopy
• Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
• Wheels, axels and wheel pants
• Pre-prepared pushrods with ball links
• Matching carbon spinner

REQUIRED HARDWARE:

Engine: 30-40cc or equivalent electric

Servos: 4 high torque plus throttle // Uses x2 per aileron, x1 for elevator and x1 on rudder

Also requires all the usual accessories such as transmitter, receiver, propeller, batteries, powerbox, extension leads and possibly other small accessories.

Extension Wire Lengths:

Throttle:
No extension required

Each aileron:
15cm
(to reach receiver directly)

Elevator:
67cm

Rudder:
Pull pull, no extension required

CENTER OF GRAVITY:

136mm
Measured back from leading edge of the wing at the fuselage.

You will find a laser engraved CG emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.